Corvette Radar and Laser System for Westminster Client

A local client contacted the team at Westminster Speed and Sound about a Chevrolet Corvette radar detector and laser defence system. We met with the client to discuss his goals for the system and inspect the vehicle. Armed with the knowledge we needed, we provided several quotes that offer different levels of protection and integration. The client chose one of our premium offerings. Let’s look at the work our team performed to integrate a Uniden radar detector into this stunning 2026 Corvette ZR1.

The Corvette ZR1 features a potent 5.5L 1,064-horsepower V8.

Carbon accents on the rear look stunning against the Torch Red paint.

Radar Receiver Installation

Integrating a custom-installed radar detection system like this Uniden R9W requires some vehicle disassembly to do it properly. Our team removed the front and rear bumper covers to run wiring for the laser transponders and radar antennas. All the wiring follows the same route as the factory harnesses to keep it away from heat sources and moving parts. There are quick disconnects on all the wiring, allowing the bumper covers to be removed without modifying any wiring.

The front receiver is mounted just inboard of the driver’s side headlight and bolted securely to the bumper support. The rear receiver is under the bumper support on the driver’s side. In both cases, the receivers will have no trouble detecting signals from police radar guns right through the plastic covers.

The front bumper of this 2026 Corvette removed to allow for wire routing.

We mounted the radar antenna as high on the vehicle as possible to provide excellent sensitivity.

The front radar antenna mounted to the front bumper support.

We removed the rear bumper cover to run wiring and mount the radar antenna.

The rear radar antenna mounted securely under the bumper support bracket.

All the wiring is secured to the factory wire harness to ensure reliability.

Laser Transponder Pods

The Uniden R9W system can handle up to six laser transponders. After looking at the front bumper, we created a pair of pods to conceal four transponders behind IR-transparent acrylic. The pods mount at the top of the center air inlet.

We repeated the process on the rear of the Corvette with two more laser transponders, each in its own pod above the license plate. We ensure that each sensor is mounted parallel to the ground to maximize range and effectiveness.

A close up of the dual transponder pods.

Each of the front pods houses two laser transponders.

Two laser transponder pods on the back of this Corvette ZR1.

Another view of the rear laser transponders.

Quick disconnects ensure the bumpers can be removed for service without modifying the Uniden system.

The brackets and hardware for the bumpers was organized to ensure perfect reassembly.

Control and Display Installation

The client wanted the control panel mounted in an easy-to-reach location. We routed the wire through the dash and mounted the control just below the engine start-stop button. A custom 3D-printed bracket holds the control panel securely. The Uniden display is housed in the overhead console, so it’s easy to see.

The Uniden display is easy to see from the driver’s seat.

The display for the Uniden system blends perfectly into the overhead console.

Quick access to the control panel makes the Uniden system easy to use.

System Testing Ensures Reliability

Once everything was installed and the bumper covers were back in place, we used our radar and LiDAR guns to verify that the sensors were operating properly and could detect signals at appropriate distances.

When the client returned to Westminster Speed and Sound, we went through the installation with him, then showed him how to use the LiDAR defence system efficiently. He was thrilled with the work and was anxious to get the car back on the road.

If you are shopping for a radar detector and laser defence system for your car, truck, or SUV, we invite you to visit our shop and talk to a member of our award-winning team. They can suggest a solution that will help ensure you drive ticket-free. If you can’t get to the store during regular business hours, give us a call or email the team.

[131866]